-01-website.jpg){kind=logo}
Introduction
Protek Electronics original ‘Titan’ series of three phase boards are still widely regarded as one of the most durable and configurable available in the UK market place today. Building on the strength of the ‘Titan’ series, Protek have now re-designed the original board to meet todays ever increasing demands.
Available in 125A or 250A and 4 to 24 out going three phase ways, we believe we have now developed a new range of three phase boards that maintain the high levels of build quality, configurability, flexibility and cost effectiveness that our customers have come to expect.
Features
- Fully rated 125A.
- Removable blank gland plates top and bottom. Cables can be glanded where needed.
- Full length earth and neutral bars both sides* allowing RCBOs to be fitted anywhere inside the board.
- Raised, removable and slotted pan assembly to facilitate easy wiring.
- Accepts Proteks 10kA range of HD MCBs and auxiliary devices, utilising a half din rail system to ensure all devices line up thus reducing installation time.
- Accepts Proteks 10kA range of RCBOs and SRCBOs.
- Accepts Proteks unique busbar shrouds which guarantees all live busbar stabs are free from human contact should the board be worked upon live.
- 18th Edition ready. Surge protection kits fit internally. and are designed to avoid losing out going ways.
- Powder coated epoxy finish RAL 7035. Key lockable door for extra security.
- Removable Door reduces installation time.
- Single phase kit for both 125A/250A options.
Incomers
MCB, MCCB, RCD (both standard & time delay), RCBO and Switch Incomers are available from 63A up to 250A in 3 and 4 pole variants. Where required cable boxes are supplied at no additional cost.
Surge Protection Kits
Our 18th Edition ready three phase boards have been specifically designed to accept our range of Surge protection kits without losing a three phase way.
We supply kits for both our 125A & 250A boards in Type 1+2 or Type 2.
Metering Kits
We understand how increasingly important it is to be able to monitor both incoming and outgoing energy usage. A range of Meter Kits have been developed for both our 125A and 250A three phase boards allowing for quick
and easy installation. kWh & MID (Pulsed/Modbus) types are both available.
Devices
HDMCBs in 10kA 1 Pole, 2 Pole and 3 Pole 1A to 63A in ‘B’ ‘C’ and ‘D’ Curve. We offer a range of HDMCB accessories to assist in control system wiring.
RCBOs in 1 Pole 10kA 6A to 63A ‘B’ and ‘C’ Curve.
SRCBOs in 1 Pole 10kA 6A to 40A ‘B’ and ‘C’ Curve. SRCBOs are our ‘Mini’ RCBO which offer increased cabling space due to their shorter size.
BLMs are a unique 1 Pole blank that offer complete shrouding of any potentially exposed busbar prongs.
MCB Outgoing Kits can be supplied when higher amperage MCBs are required. These kits cover 80A and 100A in both ‘C’ and ‘D’ Curves. The kits have been specifically designed to utilise Proteks full length din rail enabling us to counter difficulties caused by module sizes increasing when going above 63A.
Additional Accessories
To complement our range of three phase boards we also offer a number of optional accessories.
Trunking glanding plates for easy cabling or when connecting enclosures.
Various cover plates to suit incomers and devices mounted on the din rail.
Single and dual bank enclosures suitable for housing contactors, timers and other control devices.
Enclosure Specification
- Sheet steel (EN 10130 DC01)
Body : 1.2 / 1.5 mm (Depending on enclosure size)
Door : 1.2 / 1.5 mm (Depending on enclosure size) - RAL 7035w powder coating
- Galvanized steel (EN 10346 DX51D+Z)
Mounting plate : 1.5 - 2 mm (Depending on enclosure size) - IP66 Rated enclosure (TS 3033, EN 60529)
- Fully welded construction
- Foamed-in door PU sealing gasket
- Solid top and bottom gland plates with PE gasket
- 5 mm Double-bit insert polyamide lock
- Model: TP4IP-250TS
